Table of Contents
Advertisement
USEFUL OPERATION
Overview
■ Setup menu list
Item
1: SW LEVEL
2: CENTER LEVEL
3: SUR. LEVEL
4: TONE BASS
5: TONE TREBLE
6: AUDIO DELAY
7: HDMI AUDIO
8: HDMI CONTROL
9: DISPLAY MODE
10: SP TYPE
11: SP DISTANCE
Note
If the "SP TYPE" is set to the default setting ("BAR"), "SP DISTANCE" will not be displayed.
Basic procedure
20
En
Setup menu
Description of function
Adjusting the volume balance during playback
Adjusting high/low frequency sound (tone control)
Adjusting the audio delay
Setting the audio output
Switching on/off the HDMI control function
Changing the brightness of the front panel display
Changing the setting of the speaker type
Setting the distance between the speakers
1, 4
2, 3
You can change various settings of this system using
the setup menu.
1
Press SETUP to enter the setup menu.
"SW LEVEL" is displayed in the front panel
display.
2
Press the cursor
and press
(Center).
The current setting is displayed.
3
Press the cursor
value of each menu.
Press and hold the cursor
setting value faster.
4
Press SETUP again to exit the setup
menu.
y
Press RETURN to return to the previous menu.
Note
If you do not operate within 30 seconds after entering the
setup menu, the system automatically exits the setup menu.
Page
☞ P. 21
☞ P. 21
☞ P. 21
☞ P. 21
☞ P. 21
☞ P. 22
☞ P. 22
☞ P. 22
/
to select menu
/
to adjust the
/
to change the
Hide quick links:
Advertisement
Table of Contents
