Black & Decker BEMW461BH Original Instructions Manual page 9

♦ Do not start the machine when
standing in front of the discharge
opening.
♦ Do not tilt appliance when
switching it on, except if the
appliance has to be tilted for
starting.
♦ In that case, do not tilt the
appliance more than absolutely
necessary and lift only the part
that is away from the operator.
Always ensure that both hands
are in the operating position
before returning the appliance to
the ground.
♦ Switch off the appliance and wait
for the blade assembly to stop
running if the appliance has to
be tilted for transportation when
crossing surfaces other than
grass, and when transporting the
appliance to and from the area to
be mowed.
♦ Do not lift or carry the appliance
until the blade has come to
a complete standstill.
♦ Keep your hands and feet well
away from the blade.
♦ Do not put your hands or feet
near or under rotating parts.
♦ Keep away from discharge
openings at all times.
♦ Switch off, remove the plug
from the socket and ensure
that moving parts have stopped
rotating before leaving the
appliance unattended and before
changing, cleaning or inspecting
any parts of the appliance or
clearing a blockage. After striking
a foreign object. Inspect the
machine for damage and make
repairs before restarting and
operating the machine;
♦ If the appliance starts to vibrate
abnormally or if you hit a foreign
object, switch the appliance off
and remove the plug from the
socket. Check for any damage to
the appliance, replace or repair
any damaged parts, check for
and tighten any loose parts.
♦ Take care to keep the mains
cable away from the blade.
Always be aware of the position
of the cable.
♦ The motor will continue to run
for a few seconds after switching
the appliance off. Never attempt
to force the blade to come to
a standstill.
EnglisH
9