Advertisement
MAINTENANCE & CARE
16
16A
16A
16E
16D
16C
16 FLUSHING & AERATOR CLEANING
After installation is complete, remove Aerator Housing (16A). Turn Valves
(16B) on and allow both hot and cold water to run for at least one minute each.
While water is running, check for leaks. To clean the aerator, disassemble Aerator
Housing (16A) by separating the Aerator Shell (16C), Basket (16D), and Washer
(16E). Once parts have been cleaned, reassemble by reversing steps.
17
17C
17F
17D
17 HANDLE REMOVAL
Turn off water before proceeding! To remove handle, unscrew Set Screw
(17A) using Hex Wrench (17B), and remove Lever (17C) from Handle Hub
(17D). Remove Handle Hub (17D) from Valve Stem (17E) by unscrewing
Fastener (17F).
16B
17A
17A
17B
17E
ENGLISH
18
18 VALVE CARTRIDGE MAINTENANCE
Turn off water supplies and relieve pressure before working on your
faucet. Remove handles (See Step 17), unscrew Cartridge Assembly (18A) and
inspect. Replace parts as necessary. Reassemble parts by reversing steps.
CAUTION: Maintenance
DISASSEMBLY
1.
Replacement parts may be available at the store where you
purchased your faucet.
2.
When replacement parts are not available, please write or
call Price Pfi ster Consumer Service.
3.
Always turn off water and relieve pressure before
working on your faucet.
NOTE: Trim Care
Cleaning Instructions:
For all handles and decorative fi nishes, use only a soft damp
cloth to clean and shine. Use of polish, detergents, abrasive
cleaners, organic solvents, or acid may cause damage. Use of
other than a soft damp cloth will nullify our warranty!
Special Trim:
Trim products which contain porcelain or other similar
substances are not acceptable for public areas or commercial
use. Installation of said trim is at user's risk!
1-800-PFAUCET (1-800-732-8238)
For Toll-Free Pfaucet information call
1-800-PFAUCET (1-800-732-8238)
or visit www.pricepfi ster.com
• Installation Support
• Care and Warranty Information
5
18A
18A
Advertisement
