Table of Contents
Advertisement
•
9. STOP MODE OPERATION
[Operation procedure)
(1) Monitor data storage procedure
Connect a PC/AT to the G-controller module.
Set the G-controller module environment.
Start the AD57GPE installed in a PC/AT.
Start the G-controller.
Set the G-controller module
RUN/STOP keyswitch.
To STOP
STOP mode menu screen
Stop mode menu
Memory card format
File format
Monitor data source
MELSEC-A
See Section 9.1.
See Sections 8.5 and 4.2.
See Section 8.6.
To RUN or
KEV LOCK
Monitor screen
Set the G-controller module
RUN/STOP keyswitch to STOP.
Yes
No
Has the destination memory card
been formatted yet?
No
Format the memory card.
Transmit and store monitor data using the AD57GPE
installed in a PC/AT.
Does monitoring start using the newly-stored
monitor data?
Ves
Change the monitor data storage device.
9-13
See Section 9.3.
See the AD57GPE
Operating Manual,
See Section 9.5.
Advertisement
Table of Contents
