Table of Contents
Advertisement
SECURE LOCKOUT PERIOD
If the wrong user code is entered 3 consecutive times in a row, the keypad will automatically lockout
and will not be able to open the safe with the keypad for 15 minutes. During this period, the safe can be
opened and locked with the Override Access key.
LOST OR FORGOTTEN USER CODES
If the user code is lost or forgotten, you may open the safe using the Override Access key and use the
red reset button to reprogram the 3-8 digit user code. The instructions for opening the safe with the
override access key are located below.
OVERRIDE ACCESS KEY
Your safe is equipped with an Override Access key which allows immediate access in case you
forget your user codes or the batteries need to be installed or replaced.
1. Slide the override key cover up (Figure 1).
2. Insert the Override Access key into the lock (Figure 2).
3. With the key inserted turn clockwise to the right (Figure 3).
4. Turn handle to the right and pull safe door open (Figure 4).
5. After closing the safe you must turn the key to the left so it is in the locked position.
6. Remove override access key and store it in a safe place away from the safe. Replace the
cover over the key lock.
IMPORTANT: IF YOU DO NOT RETURN THE KEY TO THE LOCKED POSITION THE
SAFE WILL REMAIN UNLOCKED
Figure 1
INSTALLING REMOVABLE SHELF
1. Insert Shelf Clips into the recesses on the inside of the safe on the same level (Figure 1).
2. Place removable shelf on clips (Figure 2).
3. Gently press down on shelf until level and secure (Figure 3).
Figure 1
Figure 2
Figure 3
Figure 2
Figure 2
5
Figure 4
Advertisement
Table of Contents
