Interior Moisture Warning; Getting Started; Install Batteries - Honeywell 812901 User Manual

Waterproof fire safe
Table of Contents

Advertisement

INTERIOR MOISTURE WARNING

IMPORTANT: For optimum performance, Waterproof Fire Safes should be opened and aired
out for at least 30 minutes every two weeks to prevent any build up of moisture inside. It is
recommended to occasionally do this for longer periods. This will balance the humidity difference
inside and outside and allow any excess moisture trapped inside to escape. If you do not open
Waterproof Fire Safes on a regular basis to let them air out, you may begin to notice a musty
smell, especially on paperwork. The manufacturer will not be responsible for any damage or loss of
items placed in Waterproof Fire Safes due to moisture. Proper care and preventative maintenance
of Waterproof Fire Safes is the owner's responsibility. The owner should understand that this is
required to assure continued levels of protection and trouble-free performance during the lifetime.

GETTING STARTED

1. Slide the override key cover up (Figure 1).
2. Insert the override access key into the lock (Figure 2).
3. With the key inserted turn clockwise to the right (Figure 3).
4. Turn handle to the right and pull safe door open (Figure 4).
5. Turn key counterclockwise to return to locked position.
6. Remove override access key and store it in a safe place away from the safe. Replace the
cover over the key lock, leave safe door open, and proceed to "Install Batteries".
IMPORTANT: IF YOU DO NOT RETURN THE KEY TO THE LOCKED POSITION THE
SAFE WILL REMAIN UNLOCKED
Figure 1

INSTALL BATTERIES

The batteries must be installed before using your safe. The battery compartment is inside the safe
and opened by lifting the tab located at the bottom.
1. Remove battery compartment cover (Figure 1).
2. Insert 4 "AA" batteries. Make sure that the batteries are installed in the correct direction (+ and -)
with regard to polarity (Figure 2).
3. Replace the battery cover (Figure 3).
4. Leave the door open and proceed to the "Testing Digital Lock" section on next page.
Figure 1
Figure 2
Figure 3
Figure 2
Figure 3
2
Figure 4

Advertisement

Table of Contents
loading

Table of Contents