Table of Contents
Advertisement
Adjust the amount of ink.
Check 5
Depending on paper type, if you touch the printed surface right after printing, the printing may be scratched or ink
may adhere to the object you touched. In that case, reduce the amount of ink.
Print settings
Select
(Setup) on HOME screen > Printer settings > Print settings in this order, and then select the
paper in Reduce ink volume.
Changing Settings from Operation Panel
If brightness is set low, increase brightness setting and try printing again.
Check 6
If you are printing with a low brightness setting on plain paper, the paper may absorb too much ink and become
wavy, causing paper abrasion.
•
• Printing from your computer (Windows)
Check the brightness setting in the Printer Driver.
Adjusting Brightness
Is paper feed roller dirty?
Check 7
Clean paper feed roller.
Cleaning Paper Feed Rollers
Note
•
• Cleaning the paper feed roller abrades it, so do this only when necessary.
Is inside of printer dirty?
Check 8
During 2-sided printing, ink may stain the inside of the printer, smudging the printout.
Perform bottom plate cleaning to clean inside of printer.
Cleaning Inside the Printer (Bottom Plate Cleaning)
Note
• To prevent staining inside the printer, be sure to set the correct paper size.
Set longer ink drying time.
Check 9
This allows the printed surface to dry, preventing smudges and scratches.
•
• For Windows:
Set the waiting time using Remote UI.
1. Open Remote UI on the web browser of your device.
1.
Configuration Changes / Display Printer Status Using Web Browser
2.
2. Select Log in on Remote UI.
402
Advertisement
Table of Contents
