Canon GX5500 Series Online Manual page 314

Hide thumbs Also See for GX5500 Series:
Table of Contents

Advertisement

Important
• An error may occur if the paper size set in the print dialog is different from the paper size
registered on the printer. Select the correct items on the print dialog and the printer that
correspond to the paper being printed.
• If you selected Auto Select in Feed From, the feed position will be different. Only A4, A5, JIS
B5, Executive, and US Letter plain paper can be fed from the cassette 1.
• If printing paper such as photo paper and postcards that cannot be printed on both sides, set
Double-sided to Off.
Note
• Use the Print dialog to set general print settings such as the layout and the print sequence.
For information about print settings, refer to macOS help.
7.
7. Click Print
The printer prints according to the specified settings.
Important
• If you are performing large-format printing, make sure that there is plenty of remaining ink.
• If you set a custom paper size in Paper Size and set it to a length longer than the specified length,
the data will be printed with the "Media Type: Plain Paper, Print Quality: Standard" setting.
Note
• It can take the Wi-Fi a few minutes to get connected after the printer turns on. Print after checking
that the printer is connected to the network.
• You cannot print if Bonjour settings of printer are disabled. Check LAN settings of printer and enable
Bonjour settings.
• Refer to "Cannot Print Using AirPrint" for printing problems.
• The display of the settings screen may differ depending on the application software you are using.
Printing of Envelopes
For printing on the envelope from Mac, refer to the following.
Print result
Orientation of print data
image
The print data is rotated by 180 degrees
against the print result image.
Orientation of loading envelope
314

Advertisement

Table of Contents
loading

Table of Contents