Table of Contents
Advertisement
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[64-940]
[0-1023]
When the Function Board by other manufacturers is installed
Setting [SIGNAL LEVEL] in [SLOT IN] (SLOT input)
1)
Press as to select [SLOT IN].
2)
Press the <ENTER> button.
f The [SLOT IN] screen is displayed.
3)
Press as to select [SIGNAL LEVEL].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[64-940]
[0-1023]
Note
f The optimal setting varies depending on the installed Function Board and the output setting of the connected external device. Refer to the
Operating Instructions of the Function Board and the external devices.
Setting [EQUALIZER] in [SLOT IN] (SLOT input)
1)
Press as to select [SLOT IN].
2)
Press the <ENTER> button.
f The [SLOT IN] screen is displayed.
3)
Press as to select [EQUALIZER].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
f Adjust while viewing the image.
[0] - [7]
Setting [AUTO GAMMA SELECT] in [SLOT IN] (SLOT input)
1)
Press as to select [SLOT IN].
2)
Press the <ENTER> button.
f The [SLOT IN] screen is displayed.
3)
Press as to select [AUTO GAMMA SELECT].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[ENABLE]
Chapter 4 Settings — [DISPLAY OPTION] menu
Automatically sets the signal level.
Fixes to [64-940].
Fixes to [0-1023].
Automatically sets the signal level.
Fixes to [64-940].
Fixes to [0-1023].
Change the setting when the projected image does not stabilize. The higher the value, correction by
the equalizer becomes stronger.
(Factory default setting: [0])
Select this item when the gamma mode is to be automatically set to the one compatible with
HDR (High Dynamic Range) based on the InfoFrame information added to the image signal. In
such case, the [PICTURE] menu → [GAMMA] is set to [HDR ST2084-500], [HDR ST2084-1000], or
[HDR HLG].
ENGLISH - 141
Advertisement
Table of Contents
