Makita VC008GT202 Instruction Manual page 8

Shoulder belts
1
Fig.5
► 1 . Strap 2. Fastener
Upper belt
Fig.6
► 1 . Strap 2. Fastener
Carrying hook
CAUTION:
Use the hanging/mounting parts
for their intended purposes only. Using for unin-
tended purpose may cause accident or personal
injury.
Always grab the carrying hook when handling the vac-
uum cleaner body.
1
Fig.7
► 1 . Carrying hook
2
1
Switch action
2
Fig.8
► 1 . Suction power change button 2. ON/OFF button
To start the cleaner, simply push the ON/OFF button. To
switch off, push the ON/OFF button again.
You can change the suction power of the cleaner in
four steps by pushing the suction power change button.
Each push on this button repeats the 1 to 4 mode in a
cycle.
Level
1
2
3
4
NOTE: You can change the suction power before
turning on the cleaner.
NOTE: The cleaner starts the operation with the
same suction power as the last operation.
NOTE: If you remove the battery immediately after
turning off the appliance, while the motor is rotating,
the cleaner may not start the operation with the same
suction power as the last operation.
8 ENGLISH
1
2
Indication Mode
Quiet mode
Normal speed
mode
High speed mode
Max speed mode