System Settings - Philips EasyKey DDL702 User Manual

Enter [3] to enter user record deletion
and enter [3] to enter user fingerprint
deletion, then enter [1] to delete a
single fingerprint.
Enter a 2-digit code (user code:00-99)
to be deleted and confirm with[#]. After
hearing a voice prompt of "Succeeded',
press [*] until you finally exit the master
mode.
Delete all fingerprints
Enter [#] and enter master PIN code,
then confirm with [#].
Enter [3] to enter user record deletion
and enter [3] to enter user fingerprint
deletion, then enter [2] to delete all
fingerprints. After hearing a voice
prompt of "Succeeded", press [*] until
you finally exit the master mode.
12
System initialization
Remove the battery cover, then double
press the [RES] hole with a sharp
object. When you hear a voice prompt
of "Restoring to default settings", it
means all user record are deleted.

System settings

Language settings
Enter [#] and enter master PIN code,
then confirm with [#].
Enter [4] to go to system settings and
enter [1] to go to language settings.
or
Choose the language as needed: For
Chinese, press [1]; for English, press
[2]. After hearing a voice prompt of
"Succeeded", press [*] until you finally
exit the master mode.
Attention
The default language is English.