User Settings; System Settings - Philips EasyKey 3000 Series User Manual

User settings

Add a user
Long press the [#] key to enter the master
mode.
2
1
Press [2] to enter user settings, then press
[1] again to add a user, and the door lock
will automatically recognize the unlocking
methods and add PIN codes/fingerprints/
key tags accordingly.
Add a PIN code: enter a new user PIN code
and confirm with [#] key, re-enter the user PIN
code and re-confirm with [#], and the voice will
prompt that the addition is successful.
Add a fingerprint: place the finger on the
fingerprint sensor, follow the voice prompts to
lift and re-place the finger on the fingerprint
sensor until the voice prompts that the
addition is successful.
Add a key tag: Follow the voice prompts to
enroll the key tag until the voice prompts that
the addition is successful.
Attention
1. The user code range from 10 to 300 belongs to
general users( and the general users' verification
method could be a fingerprint, PIN code or key
tag).
2.The PIN code length is 8 digits.
Delete a user
Long press the [#] key to enter the master
mode.
12
2 2
Press [2] to enter user settings, re-press [2]
to delete a user, then delete the user codes
of the PIN code, fingerprint or key tag that
need to be deleted, and confirm with [#]
key, and the voice will prompt that the
operation is successful.

System settings

Time settings
Long press the [#] key to enter the master
mode.
1
Press [3] to enter system settings, then
press [1] to enter time settings, the lock will
automatically prompt the current time, and
the user can follow the voice prompts to
finish the time settings.
Lock code settings
Long press the [#] key to enter the master
mode.
2
Press [3] to enter system settings, then press
[2] to enter lock code settings, the lock will
prompt the current lock code, then the
user can follow the voice prompts to enter
a 3-digit or 4-digit lock code and confirm
with [#] key, the voice prompt that the
operation is successful.