Ev Compensation - Vivitar Vivicam 3805 User Manual

Icon
1. Turn the camera on and make sure that it is in
capture mode.
2. Press the MENU button to display the menu.
3. Use the ▲ or ▼ buttons to select WHITE BALANCE.
4. Use the ► or ◄ buttons to select the desired White
Balance setting.
5. Press the OK button to confirm your selection.
6. Press the MENU button to exit the menu.

EV compensation

The exposure value (EV) refers to the amount of light that is allowed to enter the camera.
The EV compensation is expressed as a single number that is used by the digital camera to
calculate the correct combination of aperture and shutter speed for producing optimum
quality pictures. Setting a higher EV compensation value will over-expose a shot while
setting a lower value will under-expose a shot. Exposure can be adjusted from –2.0 to +2.0.
The value is shown on the LCD display. To change the EV compensation value, do the
following:
1. Turn the camera on and make sure that it is in capture mode.
2. Press the MENU button to display the menu.
3. Use the ▲ or ▼ buttons to select EV COMPEN
4.
Use the ► or ◄ buttons to increase or decrease the
EV value.
5. Press the OK button to confirm your selection.
6.
Press the MENU button to exit the menu.
Description
Fluorescent – Use this mode for shooting under
fluorescent lamps.
Bulb – Use this mode for shooting under normal room
lights.
Adjusting camera settings using the menu
SATION.
19