Chapter 2 - Getting Started; Attaching The Hand Strap; Inserting Batteries - Vivitar Vivicam 3805 User Manual

Chapter 2 – Getting started
This chapter describes how to set up and prepare your camera before you start using it to
capture pictures or movie clips. Attach the hand strap, insert batteries and the SD/MMC
card to prepare your camera and adjust its settings as described below.

Attaching the hand strap

To insert the hand strap into the loop on the s
1. Thread the short loop of the ha
through the hand strap eyelet.
2.
Thread the long end of the strap
the short loop.
3. Pull the long end of the strap tight to
complete the attachment.

Inserting batteries

For performance and ec
To install or replace the batteries, do the following:
1. Slide the battery / memory card compartment cover on the side of the camera
downward in the direction of the arrow.
2. Open the cover.
3. Insert the batteries into the chamber making sure that the positive and negative
ends are properly oriented, as indicated by the battery polarity labels in the
battery chamber.
11
nd strap
through
onomy use Ni-MH rechargeable batteries with your new camera.
ide of the camera, do the following: