Operation Of Pressure Indicator; The Switch Of Air-Leak Tester (Compressor Type) - Sony Cyber-shot DSC-RX0M2 Service Manual

2019/05/15 01:58:50 (GMT+09:00)
2. Remove the side-mounted screw, set the two dry-cell batteries (type 9 V).
DC power supply can be use in place of the dry-cell batteries. (DC12 V to 24 V)

2-8-4. Operation of Pressure Indicator

• Perform the setting (Focus mode, -40.0 kPa)
1. Press the MODE button for 3 seconds or more.
2. Press the MODE button at 1 time.
Press the ▽ button, and select the Foc mode.
3.
4. Press the MODE button at 1 time.
Press the ▽ button, and change to "-40.0".
5.
6. Press the MODE button at 6 times.
7. Indicated value is changed to "FFF".
• Initialize
Press the set button 5 times with holding down the MODE button.

2-8-5. The Switch of Air-leak Tester (Compressor Type)

Air Switch
Open
Close
Pressure Regulator Knob
Turn to the Right : Decrease in pressure
Turn to the Left : Increase in pressure
Sony CONFIDENTIAL
For Authorized Servicer
21
SYS SET