Section 1 Trouble Shooting; Self-Diagnosis Function; Note On The Function Of Boards; Self-Diagnosis Code Table - Sony Cyber-shot DSC-RX0M2 Service Manual

2019/05/15 01:58:50 (GMT+09:00)

1-1. Self-diagnosis Function

1-1-1. Self-diagnosis Function
If an error occurs in this unit, the self-diagnosis function starts working and a code consisting of one alphabet and a fourdigit number
appears on the LCD. Classification of persons in charge, classification of faulty blocks, and details of errors can be checked by
referring to this indication of five alphanumeric characters in the self-diagnosis code table.
The history of past errors can be checked in "Usage and Diag record" on the DATA tab of the Adjust Manual.
The self-diagnosis function is also described in the operation manual.

1-1-2. Note on the Function of Boards

The boards and functions used in this model are mentioned in the following table.
Board
BT board
CD board
KY board
LC board
SW board
SY board

1-1-3. Self-diagnosis Code Table

Self-diagnosis Code
Repaired
by: Function
C 13
C 32
E 41
E 41
E 61
E 61
*1: Function of this code is not provided in this unit.
Function
Lens control, Wireless LAN module
Imager
Control switches
LCD
Battery
CPU, power control, Other function
Block Detailed
Code
01 Memory card is unformatted or
memory card is broken.
01 Trouble with hardware
00 Abnormality of the wireless LAN
module or CPU
01 Abnormality of network control
device
00 Difficult to adjust focus
(Cannot initialize focus)
10 *1 Zoom operations fault
(Cannot initialize zoom lens)
Section 1
Trouble Shooting
Symptom/State
Format the memory card.
Insert a new memory card.
Turn power off and turn power on again.
The peripheral circuit of between CPU and wireless LAN
module may be faulty.
Replace the board that contains this peripheral circuit.
Turn power off and turn power on again.
Turn power off and turn power on again. When this error
is not cleared, the focus control signal for the lens block
may be faulty.
Check whether this error is due to the lens or the board.
Replace the faulty lens or board.
Turn power off and turn power on again. When this error
is not cleared, operate the zoom lever and check
following items.
•
•
Check whether this error is due to the lens or the board.
Replace the faulty lens or board.
Sony CONFIDENTIAL
For Authorized Servicer
Correction
When zooming is performed, the zoom control
signal for the lens block may be faulty.
When zooming is not performed, the zoom motor
drive circuit may be faulty.
Continued
7
SYS SET