Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG FBB84707PW
Summary of Contents for AEG FBB84707PW
- Page 1 FBB84707PW User Manual Dishwasher FBB84707PM USER MANUAL...
-
Page 2: Table Of Contents
14. ENVIRONMENTAL CONCERNS..............28 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. - Page 3 ENGLISH responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...
-
Page 4: Safety Instructions
The operating water pressure (minimum and • maximum) must be between 0.5 (0.05) / 10 (1.0) bar (MPa) Follow the maximum number of 15 place settings. • If the supply cord is damaged, it must be replaced by •... - Page 5 ENGLISH • Do not use multi-plug adapters and mains socket. Contact the Authorised extension cables. Service Centre to replace the water • Make sure not to cause damage to inlet hose. the mains plug and to the mains 2.4 Use cable.
-
Page 6: Product Description
Please note that some of these spare status of the appliance. They are not... -
Page 7: Control Panel
ENGLISH 3.1 Beam-on-Floor 3.2 Internal light Beam-on-Floor is a light displayed on the The appliance has an internal lamp. It floor below the appliance door. comes on when you open the door or switch the appliance on while the door is •... -
Page 8: Programmes
5. PROGRAMMES The numbering of the programmes in the table (P1, P2, etc.) reflects their sequence on the control panel. The order of the programmes in the table may not reflect their sequence on the control panel. Programme Dishwasher... - Page 9 ENGLISH Programme Dishwasher Degree of Programme phases Options load soil None Cleaning • Cleaning 70 °C Machine the appli‐ • Intermediate rinse ance interi‐ • Final rinse Care • AirDry Crockery, • Prewash cutlery, pots, • Dishwashing 50 - 60 pans °C •...
-
Page 10: Settings
Water (l) Energy (kWh) Duration (min) 1)2) Programme 0.010 Rinse Hold 10.5 0.590 Machine Care 12.2 1.140 1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of dishes and the degree of soil can change the values. - Page 11 ENGLISH 6.2 The water softener The water softener should be adjusted according to the hardness of the water in The water softener removes minerals your area. Your local water authority can from the water supply, which would have advise you on the hardness of the water a negative effect on the washing results in your area.
- Page 12 1. Press Water softener lev‐ Amount of water • The indicators are off. • The indicator still flashes. • The display shows the current In case of the high water softener setting, setting: e.g. = level 5. it may occur also in the middle of the programme, before the rinse (twice 2.
- Page 13 ENGLISH 6.4 The rinse aid level – = the acoustic signal is activated. It is possible to set the released quantity 2. Press to change the setting. of rinse aid between level 1 (minimum 3. Press on/off to confirm the setting. quantity) and level 6 (maximum quantity).
-
Page 14: Options
How to deactivate AirDry • The display shows the current setting. Make sure the appliance is in user mode. – = AirDry is deactivated. 1. Press – = AirDry is activated. • The indicators 2. Press to change the setting. -
Page 15: Before First Use
ENGLISH 8. BEFORE FIRST USE 1. Make sure that the current level of 5. Remove the salt around the opening the water softener agrees with the of the salt container. hardness of the water supply. If not, adjust the level of the water softener. -
Page 16: Daily Use
2. Fill the dispenser (B) until the rinse Fill the rinse aid dispenser aid reaches the marking ''MAX''. when the indicator (A) is 3. Remove the spilled rinse aid with an clear. absorbent cloth to prevent excessive foam formation. - Page 17 ENGLISH appliance is in programme selection Press and hold simultaneously mode. until the appliance is 3. Press in programme selection mode. • The related indicator is on. Cancelling the programme • The display shows the programme number for Press and hold simultaneously approximately 3 seconds and then shows the programme until the appliance is...
-
Page 18: Hints And Tips
10. HINTS AND TIPS 10.1 General 10.2 Using salt, rinse aid and detergent Follow the hints below to ensure optimal cleaning and drying results in daily use • Only use salt, rinse aid and detergent and to protect the environment. -
Page 19: Care And Cleaning
ENGLISH 4. When the programme is complete, • Make sure that the spray arms can adjust the water softener according move freely before you start a to the water hardness in your area. programme. 5. Adjust the released quantity of rinse 10.5 Before starting a aid. - Page 20 11.2 Removal of foreign objects Check the filters and the sump after each use of the dishwasher. Foreign objects (e.g. pieces of glass, plastic, bones or toothpicks, etc) decrease the cleaning performance and can cause damage to the drain pump.
- Page 21 ENGLISH 2. Wash the spray arm under running 7. Reassemble the filters (B) and (C). water. Use a thin pointed tool, e.g. a 8. Put back the filter (B) in the flat filter toothpick, to remove particles of soil (A). Turn it clockwise until it locks. from the holes.
- Page 22 11.7 Cleaning the ceiling 2. To detach the spray arm from the basket, press the spray arm upwards spray arm and simultaneously turn it clockwise. We recommend to clean the ceiling spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results.
-
Page 23: Troubleshooting
ENGLISH 5. To install the spray arm (C) back, insert the mounting element (B) in the spray arm and fix it in the delivery tube (A) by turning it clockwise. Make sure that the mounting element locks into place. 6. Install the cutlery drawer on the sliding rails and block the stoppers. - Page 24 Problem and alarm code Possible cause and solution The anti-flood device is on. • Close the water tap. The display shows i30. • Make sure that the appliance is correctly installed. • Make sure the baskets are loaded as instructed in the user manual.
- Page 25 ENGLISH Problem and alarm code Possible cause and solution Small leak from the appli‐ • The appliance is not levelled. Loosen or tighten the ad‐ ance door. justable feet (if applicable). • The appliance door is not centred on the tub. Adjust the rear foot (if applicable).
- Page 26 12.1 The dishwashing and drying results are not satisfactory Problem Possible cause and solution Poor washing results. • Refer to "Daily use", "Hints and tips" and the basket loading leaflet. • Use more intensive washing programme. • Activate the Spray Zone option to wash items with heavy or stubborn soil.
-
Page 27: Technical Information
ENGLISH Problem Possible cause and solution There are residues of deter‐ • The detergent tablet was stuck in the dispenser and gent in the dispenser at the was not washed away by water. end of the programme. • Water cannot wash away the detergent from the dis‐ penser. -
Page 28: Environmental Concerns
Water supply min. 5 - max. 60 °C Cold water or hot water Capacity Place settings 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply to decrease energy consumption. - Page 32 www.aeg.com/shop...