Advertisement

Quick Links

FFB72746PW
FFB72746PM
USER
MANUAL
EN
User Manual
Dishwasher

Advertisement

Table of Contents
loading

Summary of Contents for AEG FFB72746PW

  • Page 1 FFB72746PW User Manual Dishwasher FFB72746PM USER MANUAL...
  • Page 2 Failure to strictly adhere to the requirements in this manual may result in personal injury, property damage and affect your ability to make a claim under the AEG manufacturer’s warranty provided with your product. Products must be used, installed and operated in accordance with this manual.
  • Page 3: Table Of Contents

    15. WARRANTY ......................22 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 4 ENGLISH damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...
  • Page 5: Safety Instructions

    Put knives and cutlery with sharp points in the cutlery • basket with the points down or in a horizontal position. Do not leave the appliance with the door open, to • avoid a tripping hazard. Before any maintenance operation, deactivate the •...
  • Page 6 ENGLISH installation. Make sure that there is Service Centre to replace the water access to the mains plug after the inlet hose. installation. 2.4 Use • Do not pull the mains cable to disconnect the appliance. Always pull • Do not sit or stand on the open door. the mains plug.
  • Page 7: Product Description

    3. PRODUCT DESCRIPTION Worktop Rinse aid dispenser Top spray arm Detergent dispenser Upper spray arm Lower basket Lower spray arm Upper basket Filters Cutlery drawer Rating plate Air vent 3.1 Beam-on-Floor The Beam-on-Floor is off when the appliance is The Beam-on-Floor is a light that is deactivated.
  • Page 8: Control Panel

    ENGLISH 4. CONTROL PANEL TimeSaver button On/off button Display XtraDry button Program button ExtraHygiene button Delay button Indicators MyFavourite button 4.1 Indicators Indicator Description Rinse aid indicator. It is on when the rinse aid dispenser needs refilling. 5. PROGRAMMES The numbering of the programmes in The order of the programmes in the the table (P1, P2, etc.) reflects their table may not reflect their sequence on...
  • Page 9 Programme Degree of soil Programme phases Options Type of load • Normal or light • Wash 45 °C • XtraDry soil • Rinses • Delicate crock- • Dry ery and glass- ware • Fresh soil • Wash 60 °C •...
  • Page 10: Settings

    ENGLISH Water Energy Duration Programme (kWh) (min) 10.5 0.01 9.0 - 10 1.1 - 1.3 230 - 250 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. 5.2 Information for test In your request please include the product number code (PNC) found on...
  • Page 11 If the drying 2. Press repeatedly to change the results are satisfactory while using multi- setting. tablets only, it is possible to deactivate 3. Press the on/off button to confirm the notification for refilling rinse aid.
  • Page 12: Options

    ENGLISH • The display shows the current During the drying phase, the setting. door opens automatically – = AirDry is deactivated. and remains ajar. – = AirDry is activated. CAUTION! 2. Press to change the setting. Do not try to close the 3.
  • Page 13: Before First Use

    XtraDry is a permanent option for all This option increases the pressure and the temperature of the water. The programmes other than . It is washing and the drying phases are automatically activated in next cycles. shorter. This configuration can be changed at any time.
  • Page 14: Daily Use

    ENGLISH 2. Fill the dispenser (B) until the rinse CAUTION! aid reaches the marking ''MAX''. Only use rinse aid designed 3. Remove the spilled rinse aid with an specifically for dishwashers. absorbent cloth to prevent excessive foam formation. 1. Open the lid (C). 4.
  • Page 15: Hints And Tips

    Cancelling the delay start while 5. Close the appliance door to start the programme. the countdown operates Starting a programme with When you cancel the delay start you have to set the programme and options delay start again. 1. Set a programme.
  • Page 16: Care And Cleaning

    ENGLISH 10.2 Using rinse aid and • Make sure that the spray arms can move freely before you start a detergent programme. • Only use rinse aid and detergent for 10.4 Before starting a dishwasher. Other products can cause damage to the appliance. programme •...
  • Page 17 5. Make sure that there are no residues of food or soil in or around the edge 1. Turn the filter (B) counterclockwise of the sump. and remove it. 6. Put back in place the flat filter (A). Make sure that it is correctly positioned under the 2 guides.
  • Page 18: Troubleshooting

    ENGLISH 11.2 Cleaning the upper spray simultaneously turn it counterclockwise until it locks into place. We recommend to clean the upper spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results. 1. Pull out the upper basket. 2.
  • Page 19 With some problems, the display to contact an Authorised Service shows an alarm code. Centre. The majority of problems that can occur can be solved without the need Problem and alarm code Possible solution You cannot activate the ap- •...
  • Page 20 ENGLISH Problem and alarm code Possible solution The appliance door is diffi- • The appliance is not levelled. Loosen or tighten the ad- cult to close. justable feet (if applicable). • Parts of the tableware are protruding from the baskets. Rattling/knocking sounds •...
  • Page 21: Technical Information

    Problem Possible cause and solution The dishes are wet. • For the best drying performance activate the option XtraDry and set AirDry . • The programme does not have a drying phase or has a drying phase with low temperature.
  • Page 22: Installation

    ENGLISH Voltage (V) 200 - 240 Electrical connection Frequency (Hz) 50 / 60 Wattage (W) 1550-2200 Water supply pressure bar (minimum and maximum) 0.5 - 8 kPa (minimum and maximum) 50 - 800 Water supply max 60 °C Cold water or hot water Capacity Place settings 1) Refer to the rating plate for other values.
  • Page 23 Adjusting the level of the INFORMATION''. Make sure that the local water authority gives you the appliance average mains pressure in your area. A correct adjustment of the level of the Water drain hose appliance allows the door to close and seal correctly.
  • Page 24: Warranty

    (c) cosmetic damage which does not affect the operation of the Appliance; This document sets out the terms and conditions of the product warranties for AEG Appliances. It is an important document. Please keep it with your proof (d) damage to the Appliance caused by: of purchase documents in a safe place for future reference should there be a (i) negligence or accident;...
  • Page 25 ENGLISH 16. ENVIRONMENTAL CONCERNS appliances marked with the symbol Recycle materials with the symbol with the household waste. Return the Put the packaging in relevant containers product to your local recycling facility or to recycle it. Help protect the contact your municipal office. environment and human health by recycling waste of electrical and electronic appliances.
  • Page 26 www.aeg.com/au...

This manual is also suitable for:

Ffb72746pm

Table of Contents