Advertisement

FSK31600Z
USER
MANUAL
EN
User Manual
Dishwasher

Advertisement

Table of Contents
loading

Summary of Contents for AEG FSK31600Z

  • Page 1 FSK31600Z User Manual Dishwasher USER MANUAL...
  • Page 2: Table Of Contents

    12. TECHNICAL INFORMATION................. 19 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 3 ENGLISH damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...
  • Page 4: Safety Instructions

    Put the cutlery in the cutlery basket with the sharp • ends pointing down or put them in the cutlery drawer in a horizontal position with the sharp edges down. Do not leave the appliance with the open door •...
  • Page 5 ENGLISH • Before connection to new pipes, • Dishwasher detergents are pipes not used for a long time, where dangerous. Obey the safety repair work has been carried out or instructions on the detergent new devices fitted (water meters, packaging. etc.), let the water flow until it is clean •...
  • Page 6: Product Description

    3. PRODUCT DESCRIPTION Upper spray arm Rinse aid dispenser Lower spray arm Detergent dispenser Filters Cutlery basket Rating plate Lower basket Salt container Upper basket Air vent 4. CONTROL PANEL On/off button Programme button Programme indicators Delay button Indicators...
  • Page 7: Programmes

    ENGLISH 4.1 Indicators Indicator Description Running programme indicator. It comes on when the programme starts and goes off when the programme is completed. End indicator. Rinse aid indicator. It is always off while the programme operates. Salt indicator. It is always off while the programme operates. 5.
  • Page 8: Settings

    6. SETTINGS 6.1 Programme selection How to enter user mode mode and user mode Make sure the appliance is in programme selection mode. When the appliance is in programme selection mode it is possible to set a To enter the user mode, press and hold programme and to enter the user mode.
  • Page 9 ENGLISH German de- French degrees mmol/l Clarke de- Water softener lev- grees (°dH) (°fH) grees <4 <7 <0.7 < 5 1) Factory setting. 2) Do not use salt at this level. How to activate the acoustic Regardless of the type of detergent used, set the proper water hardness signal for the end of level to keep the salt refill indicator...
  • Page 10: Before First Use

    How to deactivate AirDry During the drying phase, the door opens automatically Make sure the appliance is in user mode. and remains ajar. 1. Press the programme button twice. CAUTION! • The indicators Do not try to close the are on.
  • Page 11: Daily Use

    ENGLISH 6. Turn the cap of the salt container clockwise to close the salt container. CAUTION! Water and salt can come out of the salt container when CAUTION! you fill it. After you fill the Only use rinse aid salt container, immediately specifically designed for start a programme to dishwashers.
  • Page 12 2. Press Delay to delay the start of the programme of 3 hours. • The indicator comes on. 3. Close the appliance door to start the countdown. When the countdown is completed, the programme starts. Opening the door while the...
  • Page 13: Hints And Tips

    ENGLISH End of the programme mode. If you open the door before the activation of standby mode, the When the programme is completed the appliance is automatically deactivated. indicator is on. 2. Close the water tap. 1. Press the on/off button or wait for the appliance to switch to standby 9.
  • Page 14: Care And Cleaning

    • Soak cookware with burnt-on food • The spray arms are not clogged. before washing it in the appliance. • There is dishwasher salt and rinse aid • Put hollow items (cups, glasses and (unless you use multi- tablets).
  • Page 15 ENGLISH 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A). CAUTION! An incorrect position of the filters can cause bad washing results and damage 4.
  • Page 16: Troubleshooting

    11. TROUBLESHOOTING If the appliance does not start or it stops With some problems the end indicator during operation, before you contact an flashes intermittently indicating a Authorised Service Centre, check if you malfunction. can solve the problem by yourself with The majority of problems that can the help of the information in the table.
  • Page 17 ENGLISH Problem and alarm code Possible cause and solution The appliance stops and starts more • It is normal. It provides optimal cleaning re- times during operation. sults and energy savings. The program lasts too long. • If the delayed start option is set, cancel the de- lay setting or wait for the end of the count- down.
  • Page 18 Problem Possible cause and solution Poor drying results. • Tableware has been left for too long inside a closed appliance. • There is no rinse aid or the dosage of rinse aid is not enough. Set the rinse aid dispenser to a higher level.
  • Page 19: Technical Information

    ENGLISH Problem Possible cause and solution Limescale deposits on the ta- • The level of salt is low, check the refill indicator. bleware, on the tub and on • The cap of the salt container is loose. • Your tap water is hard. Refer to "The water softener". the inside of the door.
  • Page 20 office.
  • Page 21 ENGLISH...
  • Page 22 www.aeg.com...
  • Page 23 ENGLISH...
  • Page 24 www.aeg.com/shop...

Table of Contents