Kenwood FG-273 Instruction Manual page 3

INTRODUCTION
The MODEL FG—273 Sweep/ Function Generator
provides of a function generator, pulse generator, Sweep
oscillator, and frequency counter.
FEATURES
Wide—band design : seven ranges cover full oscillation
frequency from 0.02 Hz to 2 MHz
Selectable output of sine waves, square waves, and
triangular waves through one—touch operation.
TTL/CMOS square wave output connector facilitates
using TTL—level and CMOS-—level output square waves
as the signal source for experiment of a digital circuit.
The symmetry Function varies symmetry of saw—tooth
waves and pulse waves.
It can invert the wave polarity.
Equipped with a 6—segment LED oscillation frequency
display and a counter covering the range from 5 Hz to
10 MHz.
10.
The log sweep and linear sweep function provides
sweep frequency control up to max. 1000: 1. Sweep
frequency is variable from 0.5 Hz (2 seconds) to 50
Hz (20 milliseconds ).
A small and light-weight case with convenient
carrying handle, which also serves as a tilting stand.