Cisco Nexus 9348GC-FX3 Hardware Installation Manual page 8

Overview
• Power supply modules (two—one for operations and one for redundancy [1+1]) with the following
choices (a mix of AC and DC power sources is supported but do not mix airflow directions):
• 350-W AC power supply with port-side intake airflow (burgundy coloring) (NXA-PAC-350W-PI2)
• 350-W AC power supply with port-side exhaust airflow (blue coloring) (NXA-PAC-350W-PE2)
• 350-W PHV power supply with port-side intake airflow (burgundy coloring) (NXA-PHV-350W-PI)
• 350-W PHV power supply with port-side exhaust airflow (blue coloring) (NXA-PHV-350W-PE)
• 440-W DC power supply with port-side intake airflow (burgundy coloring) (NXA-PDC-440W-PI)
• 440-W DC power supply with port-side exhaust airflow (blue coloring) (NXA-PDC-440W-PE)
Note The 350-W AC power supply does not have the standby voltage to be able to
carry to a second power supply, to allow it to communicate and poll the device.
The following figure shows the switch features on the port side of the chassis.
1 LEDs
3 QSFP28 ports (2)
To determine which transceivers, adapters, and cables are support this switch, see the
Modules Compatibility Information
The following figure shows the switch features on the power supply side of the chassis.
1 Console port
3 Power supply modules (1 or 2) (AC
power supplies shown) with slots
numbered 1 (left) and 2 (right)
Cisco Nexus 9348GC-FX3 NX-OS Mode Switch Hardware Installation Guide
2
2 SFP28 ports (4)
4 10M/100M/1G RJ45 ports (48)
document.
2 Grounding pad
4 Fan modules (3) with slots numbered from 1 (left) to 3 (right)
Overview
Cisco Transceiver