Table of Contents
Advertisement
gateway. If you want to access the storage system via a specified gateway, add route here.
Steps:
1.
Go to System > Network.
2.
Click Add Route.
3.
Input Route IP Address, Subnet Mask, and Default Gateway.
The client server within route IP address can access the storage system via the default gateway.
4.
Select bound data of Network Interface.
5.
Click OK to add the route. The client server within 10.128.50.1 to 10.128.50.55 can access the storage system
via the bound network interface 1 whose the gateway is 192.168.0.2.
8.2.4 MAC and IP Bonding
Purpose:
Only client with the specified MAC address and IP address is allowed to get access to iSCSI HDD.
Steps:
1.
Go to System > Network.
2.
Click MAC&IP Bonding.
3.
Input target Client IP Address and MAC Address.
Ensure the client IP is in the same network segment with the storage system.
Storage System User Manual
Add Route
MAC&IP Bonding
64
Advertisement
Table of Contents
