Machine Parameters And Performance - Philips Saeco XSmall Service Manual

XSMALL
2.4.

Machine parameters and performance

Minimum
PRODUCT
amount
QUANTITY
Espresso*
Medium
coffee
Long coffee
Hot water
Steam for
frother
* No XSmall Puro
RINSE
When performed
No. of pulses
Stopping option
User disable option
Production/Service
department disable option
No. of pulses user adjust-
ment option
No. of pulses Production/
Service department ad-
justment option
Pulse range
(Min. - Max.)
Hard-
Water hardness
ness
1
Soft (up to 7°dH)
2 Medium (7° - 14°dH)
3
Hard (15° - 21°dH)
4 Very hard (over 21°dH)
The default water hardness level is 4. Each litre of water corresponds to approximately
2,000 pulses.
In the machines where is not possible change the water hardness the default
hardness level is 3.
Default
amount
(Puls.) (Puls.)
70 165
No No
70 440
Continues until the water supply has been exhausted (capacitive sensor)
Continues until the water supply has been exhausted (capacitive sensor)
It is activated when the ma-
chine is in Power-Off for more
than 15 minutes
Yes, by pressing any key
Descaling cycle frequency
Maximum
amount
(Puls.)
600
No
600
Initial rinse
150
No
No
No
No
No
Without water filter
240 litres (480,000 pulses)
120 litres (240,000 pulses)
60 litres (120,000 pulses)
30 litres (60,000 pulses)
02 TECHNICAL SPECIFICATIONS
Programm. Programm. by
by the user Production / Service
Yes
No
Yes
Final rinse
When the machine is switched off
electronically, manually or automati-
cally after 30minutes, if at least one
coffee has been dispensed, before
switching off
80
Yes, by pressing any key
No
No
No
No
No
With water filter
480 litres (960,000 pulses)
240 litres (480,000 pulses)
120 litres (240,000 pulses)
60 litres (120,000 pulses)
No
No
No
05/05