Table of Contents
Advertisement
Wi-Fi
Connectivity
The Breville AirActive 3D™ Connect air
circulator can offer remote operation by using
a home Wi-Fi connection and the Breville
Home Connect™ app downloaded to a
compatible mobile phone.
To go straight to the appropriate app store,
Scan the QR code below.
For instructions on how to use the app,
scan the QR code below, refer to the Quick
Start Guide that can be found in the box or
go to: tinyurl.com/HomeConnectQuickStart
n
NOTE:
The Breville Home Connect™ app is
compatible with mobile phones running
Android® 5.0 or later and iOS devices
9.0 or later.
n
NOTE:
To control the air circulator using the app, the
air circulator must be plugged in to an active
power outlet.
SET UP YOUR AIR CIRCULATOR
1. Ensure the mobile device is connected to
a home Wi-Fi network.
2. The air circulator must be on standby mode.
Once on standby, the
fast on the display panel. The air circulator
is now ready to connect.
3. Log into your Breville Home Connect™ app
account and stay on the "Home" page. To
add the air circulator to the list, touch 'Add
Device' or the
symbol found in the top
right-hand corner of the screen. Follow the
prompts in the app.
4. If the connection is successful, the air
circulator will appear in the main page of
the app and the
circulator will illuminate.
5. If connection is unsuccessful, touch and
hold the
button for 5 seconds until the
symbol is flashing slowly. Follow the
prompts in the app to connect in a different
mode.
symbol will flash
symbol light on the air
13
Advertisement
Table of Contents
