Table of Contents
Advertisement
SMART ECO MODE
SMART ECO mode will automatically adjust
the fan speed depending on the ambient
temperature. This program delivers the optimal
cycle to save energy and operate quietly and
efficiently, when possible. SMART ECO mode
is ideal to use during sleep or to be left on for a
long period of time.
When the air circulator is on, to activate SMART
ECO mode, touch the
illuminates next to the SMART ECO mode
on the control panel. The air circulator will
automatically adjust the fan speed based on the
following programmed rules.
Ambient T (°C)
< 26
26 – 28
29 – 34
> 35
n
NOTE:
Fan speed in this mode cannot be
manually adjusted.
To stop SMART ECO mode and return to
NORMAL mode, touch the
no lights illuminate next to NATURAL and
SMART ECO modes.
AUTO-OFF TIMER
This Breville air circulator comes with an 8-hour
auto-off timer that can be set in 1 hour intervals
and switches fan to standby mode after the set
number of hours has elapsed. The AUTO-OFF
TIMER can be set on any MODE.
To set the timer, touch the
until the desired number of hours is displayed
on the LED display and a green light illuminates
above the TIMER button on the control panel.
The auto-off timer will start on the selected
mode, and the mode will stop automatically
once the auto-off timer has expired.
button until the light
Air circulator speed
Speed 1
Cycle between speed 1
and speed 2. Operation for
7.5 secs on each speed.
Cycle between speed 2
and speed 3. Operation for
7.5 secs on each speed.
Speed 3
button until
button repeatedly
The LED display will display the set circulator
mode setting once the auto-off timer begins. To
check the pre-set time left on the LED display,
touch the
button once.
To cancel the auto-off time anytime once set,
touch the
button until '0H' is displayed on
the LED display screen and the green light
above the TIMER button no longer illuminate
within a few seconds.
n
NOTE:
• To run the air circulator continuously, do not
set the timer or set the timer to '0H'.
• All modes can be adjusted at any time after
the timer is set.
• The air circulator will stop and switch to
standby mode once the set time has elapsed.
OSCILLATION AND 3D AIR
CIRCULATION
The Breville air circulator can oscillate
automatically left and right and up and down.
The oscillations can be set on any MODE.
To activate the left and right oscillation, touch
the
button once. The air circulator will move
left and right continuously.
To activate the up and down oscillation, touch
the
button once. The air circulator will start
to move up and down continuously.
To achieve 3D air circulation, activate both
horizontal and vertical oscillations. This will set
a unique air circulation pattern.
To set the orientation of your air circulator,
touch the respective oscillation button
again. The air oscillator will stay at your
preferred position.
When the air circulator is turned off,
the oscillation will return to its initial
position automatically.
11
Advertisement
Table of Contents
