Advertisement
6.
To connect using a QR code:
a.
Tap
and select the barcode reading option to scan the QR
code on the IH40 to pair with it.
7.
Press the MODE button and release within 3 seconds to
check IH40's operation mode. (Not applicable for Model
IH40-0.)
• If the RFID LED lights up, the IH40 is in RFID mode.
• If the 1D/2D LED lights up, the IH40 is in Barcode mode.
• Press and hold the MODE button for at least 3 seconds to
switch to RFID mode.
8.
Press the trigger button to read tags.
Note: The barcode reading option is only supported by
Honeywell mobile devices.
Switch on the Bluetooth function and Location (Settings >
Security & location> Location) on the mobile device before
connecting, or the connection will fail.
RFID tags can be read when they are in range. The range
(typically 0.2ft-20ft) at which a tag can be read depends on
the tag type and size and the number of tags in the field.
on the right top corner of the Connect screen
13
Advertisement
