Table of Contents
Advertisement
You Hear
Tone Name
Decremen-
Bluetooth Unpaired
tal- Pitched
Bluetooth Disconnected
Tone
4.7
Phone Call Displays and Alerts
The following phone call displays and alerts appears on the radio display when you make and receive phone
calls. The radio also uses alert tones to indicate the current status.
You Hear
You See
A Long Tone
No phone
Phone busy
A Busy Tone
Phone busy
–
No acknowl-
edge
A High-
–
Pitched Tone
4.8
Display Color Change On Channel
This feature provides visual channel identification for users to have a quick visual recognition on a particular
channel.
Your radio must be programmed to allow you to use this feature.
When changing channels, the accessories backlight (DRSM) changes to the programmed color.
The accessories backlight change to white for the following scenarios:
●
When changing to or powering up on invalid channels such as unprogrammed channels, receiver
frequency error channel and blank channels.
●
The radio is in radio stun or radio lock mode.
NOTE: Radio stun or radio lock mode is only applicable to Model 3.5.
For hard key zeroize, key loading, and scan list programming, the backlight follows the home channel
backlight color.
Heard
When Bluetooth accessory is unpaired from the radio.
When Bluetooth accessory is disconnected from the radio.
When
You press the PTT but-
ton and the phone sys-
tem is not available.
The phone system is
busy.
When a channel is not
available.
The call is not acknowl-
edged.
When you release the
PTT button.
Chapter 4: Status Indicators
Notes
Press
to hang up. The radio returns
to the Home screen.
Press
to exit the phone mode and try
your call later.
The radio automatically connects when a
channel opens.
Press
to hang up. The radio returns
to the Home screen.
The radio indicates to the landline party
that the caller may begin talking.
MN004863A01-AN
33
Advertisement
Table of Contents
