Temperature Controller - U-Line Echelon 2075DWRRSS User Manual

Temperature Controller

The temperature controls are integrated in the top, front drawer panel.
They consist of an LED display and touch sensors for each drawer and
a touch sensor to control the lighting ("
plays show the drawer's temperature set point, and are calibrated in
degrees Fahrenheit. The controls are factory programmed for a set
point of 60°F for the top drawer and 40° F for the bottom drawer. Each
drawer's display will show its set point when the unit is first powered up.
To display actual temperature of each drawer, press the "
touch sensors simultaneously for three seconds. The display indicates
the actual temperature. After approximately 10 seconds, the set point
temperature displays.
Figure 23
", "
Figure 24
27
DWR034
" and " "). The LED dis-
DWR045
" and " "