Arm/Disarm The Zone - HIKVISION DS-PWA32-HSR Manual

System Maintenance
On the device list page, tap the security control panel and then log in to the device (if required) to
enter the control panel page.
Tap → System Maintenance to set parameters.
Reboot Device
The device will restore all parameters to the default
Partly Restore
The device will restore to its default
parameters, Wi-Fi network, detector
Public
On the device list page, tap the security control panel and then log in to the device (if required) to
enter the control panel page.
→ Management → Public
Tap
slide Enable, the
You can select linked

4.4.9 Arm/Disarm the Zone

Arm or disarm the zone manually as you desired.
Note
Axiom security control panel supports 4
On the device list page, tap the security control panel and then log in to the device (if required) to
enter the page. You can swipe to the
AX Security Control Panel
except for admin user
Figure 4-40 Public
1 will be regarded as the public
as well.
and wireless device parameters.
to set parameters.
or right to switch
68
wired network