Advertisement
A S S E M B LY I N S T R U C T I O N S
Assemble the knob (23) to the side valve Assemble the ingition pin to the side burner
11
table using M4x8mm bolts (GG)
Remove the ignitor cap,insert AA battery(1.5V) into the ignitor body with the positive "+" end
facing out ,replace ignitor cap.
Assemble the side burner rack(19) to the side burner table.put the warming rack(16) ,cooking
12
grills(17),flame tamer (18) into the body.
WARNING: IT IS VERY IMPORTANTTO CHECK
AND ENSURETHAT EACHAND EVERY BURNER
IS FULLY ENGAGED WITH THE ADJACENT VALVE
ORIFICE BEFORE COMPLETING STEP 10.
FAILURE TO DO SO MAY RESULT IN FIRE OR
EXPLOSION, POSSIBLY CAUSING SERIOUS
INJURY OR DEATH. REFER TO MAINTENANCE
SECTION INSTRUCTIONS TO PROPERLY CHECK THE
ENGAGEMENT.
1
3
A t t a c h t h e g r e a s e b o x ( 2 5 ) t o t h e g r e a s e t r a y
10
Advertisement
