Installing the front bezel option
Procedure
1. Attach the front bezel to the right chassis ear.
2. Press and hold the front bezel release latch.
3. Close the front bezel.
4. (Optional) Install the Kensington security lock.
For more information, see the lock documentation.
The installation is complete.
Power supply options
Depending on the installed options and the regional location where the server was purchased, the server can be configured
with one of the supported Power supply specifications.
Power supply warnings and cautions
WARNING: To reduce the risk of electric shock or damage to the equipment:
•
Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
•
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.
•
Unplug the power cord from the power supply to disconnect power to the equipment.
•
Do not route the power cord where it can be walked on or pinched by items placed against it. Pay particular
attention to the plug, electrical outlet, and the point where the cord extends from the server.
Hardware options installation
75