Installation - Kenwood KDC-3011 Instruction Manual

nglish
ity ecliechacelil
8 Installation
Firewall or metal support
Bend the tabs of the
mounting sleeve with
a screwdriver or
Ww similar utensil and
Self-tapping Accessory@ attach it in place.
screw Metal mounting
(commercial strap
y available)
Make sure that the unit is installed securely in place. If the unit is
unstable, it may malfunction (for example, the sound may skip}.
—26—
@ installing in Japanese-Made Cars
1 Refer to the section "Removing the hard rubber frame (P. 27)"
and then remove the hard rubber frame.
2 Align the holes in the unit (two locations on each side) with the
vehicle mounting blacket and secure the unit with the
accessory screws.
T: Toyota cars
N: Nissan cars
© During installation, do not use any screws except for those
provided. The use of different screws might result in damage to
the main unit.
¢ Damage may occur if a screwdriver or similar tool is used with
excessive force during the installations.
Accessory@)...for Nissan car
Accessory® ...for Toyota car