Table of Contents
Advertisement
ACCESSORIES AND INSTALLATION
@ ACCESSORIES
Detachable
case
Metal mounting strap
Hex. bolt {M5 x 20)
Hex. nut (M5)
@ INSTALLATION
1 Before installation and wiring, remove the © terminal of the battery to prevent short-
circuiting
. Connect the tnput and output cords of the system.
_ Connect the ground to the metal chassis of the car.
Connect the memory
backup lead (yellow).
Connect the power supply lead (red).
Install the set and after confirming the installation and wirings are correct, connect
ine — terminal of tne battery.
OO
bh WAY
e
lf a fuse is blown,
first check that the associated wires are not short-circuited then
replace the fuse with a new one having the same capacity.
Secure unconnected
wires properly so that they do not contact the vehicle chassis.
Do not remove
the caps attached
to the unused
terminals.
As the unit uses BTL output, always connect the without stripe speaker wires to the
= terminals of the speaker systems.
Never let the
© speaker wires touch and never
connect them to the chassis (ground). Do not let the speaker terminals come into
contact with the chassis (ground). Insulate any unused output wire to prevent a short
Circuit.
Advertisement
Table of Contents
