Touch Sensor Tone; Adjusting Time; Disabled System Indicator (Dsi); Theft Deterrent Faceplate - Kenwood KDC-3011 Instruction Manual

-nglis
Other features
Touch Sensor Tone
This function produces a beep sound that accompanies button
operation. It can be switched on or off.
Switching the Beep On/Off:
1 Press the MENU button for at least one second.
"MENU*' is displayed and the menu mode is turned on.
2 Keep pressing the »1 button until the Touch Sensor Tone
function appears in the display.
Press the ke<d button to search in the other direction.
The function setting is indicated by "BEEP ON* or "BEEP OFF" in
the display, indicating that the current beep ae Ng is on or off,
respectively.
3 Switching settings
Press either the AM or FM button.
The display and setting will change.
4 Press the MENU button to end the menu mode.
The beep sound is not output from the preout jacks.
Adjusting Time
Adjust the time.
1 Press the MENU button for at least one second.
"MENU" is displayed and the menu mode is turned on.
2 Keep pressing the 1 button until the "CLK ADJ" appears in
the display.
Press the kd button to search in the other direction.
(3. \Press either the AM or FM button for at least two seconds to
'enter the Time Adjustment mode. '
The hour display will blink.
4 Adjusting the hours
Press the FM button to advance the hours, or press the AM
Bure to make the hours go back:
Theft Deterrent Faceplate
e Adjusting the minutes
Press the 1 button to advance the minutes, or press the
Kd button to make the minutes go back.
5 Press the MENU button to end the menu mode.
Function of the KDC-3011/KDC-2011S
Disabled System Indicator (DS!)
A red indicator will blink on the unit after the faceplate is
removed, warning potential thieves. The factory default for this
function is ON.
Turning Disabled System Indicator On/Off:
1 Press the MENU button for at least one second.
"MENU' is displayed and the menu mode is turned on.
2 Keep pressing the i button until the Disabled System
Indicator function appears in the display.
Press the kd button to search in the other direction.
The function setting is indicated by "DSI ON" or "DS! OFF" in the
display, indicating that the disable system indicator is on or off,
respectively.
3 Switching settings
Press either the AM or FM button.
The display and setting will change.
4 Press the MENU button to end the menu mode.
Function of the KDC-3011/KDC-2011S —
The faceplate of the unit can be detached and taken with you,
neene to deter theft.
'