Replacing The Auto Cutter Blade - Epson SureColor SC-P8500DM Series User Manual

SC-P8500DM/SC-P8500D/SC-P6500D/SC-P6500DE/SC-P6500E/SC-T7700DM/SC-T5700DM/SC-T7700D/SC-T5700D/SC-3700D/SC-T3700DE/SC-T3700E/SC-P8500DL/SC-T7700DL Series User's Guide
G
Set the paper support to the position shown in
the illustration, and then close the flap.

Replacing the auto cutter blade

Replace the auto cutter blade if the paper is not cut
cleanly or if the edges of the cut sections are fluffy.
Supported auto cutter blades
"Options and Consumable Products" on page 214
U
Maintenance
Use a cross-head screwdriver to replace the auto cutter
blade. Make sure you have a cross-head screwdriver
with you before replacing the cutter.
c
Important:
Take care not to damage the cutter blade.
Dropping it or knocking it against hard objects
may chip the blade.
A
Remove any paper from the printer.
"Removing Roll 1/Roll paper" on page 44
U
"Removing Roll 2 (Except for the SC-
U
P6500E Series/SC-T3700E Series)" on page 48
"Removing Cut Sheets/Poster Board" on
U
page 56
B
Press Menu - Maintenance - Replace Auto
cutter blade.
C
Open the maintenance cover.
D
Loosen the screw that secures the cutter with
the cross-head screwdriver.
184