Cisco 8608 Replace page 25

Replace Chassis Components
Step 3
Close the terminal block cover and finger-tighten the captive installation screw (approximately 0.25 Nm).
Remove a DC Power Supply Unit from the Chassis
To remove a DC-input Power Supply Unit (PSU) from the chassis, follow the steps described here.
Before you begin
Warning
Procedure
Step 1 Pull out the latch on the module, to unlock it.
Figure 17: Unlock the Module
1
Statement 1073 No User-Serviceable Parts
There are no serviceable parts inside. To avoid risk of electric shock, do not open.
Release latch to be pulled out (towards
yourself)
Remove a DC Power Supply Unit from the Chassis
3 Comparative location of the nut on a
module where the release latch has
not been pulled out.
Replace Chassis Components
25