Su Us Ss - Yamaha DEQ5E Operation Manual

e OFF: No transmission or reception is possible.
e PGM CHANGE: Only program changes can be transmitted, but all data can be received.
(BULK OUT is possible)
O ALL: All data (Program Change and Parameter Set Value) is transmitted and received.
«DEQS control display example>
RS@3S СОММ,1/0
DEE üFF
(6) Parameter copy
This menu is provided for copying parameters in the edit area. Note that data to be copied to can be rewritten.
16
€ ЕКОМ/ТО....................... Selects data to be copied to and data to be copied. Selecting FROM (to be copied)
determines TO (to be copied to) automatically as shown blow.
FROM TO
€ GEQ INITIAL DATA — — — EDIT AREA ......... Recalls GEQ initial data from the initial data area to
the edit area.
€ PEQ INITIAL DATA — — —2 EDIT AREA ......... Recalls PEQ initial data from the initial data area to
the edit area.
€ L-DATA — — — —— —— — — R-DATA ................ Copies parameter data, recalled in the edit area, from
the L side of the program to the R-side parameter.
€ R-DATA — — ———— — o E L-DATA ................ Copies parameter data, recalled in the edit area, from
the R side of the program to the L-side parameter.
e ITEM ...... If "L-DATA" or *R-DATA" is selected for FROM, a parameter to be copied can be selected.
ALL z. qasa T All the parameter values.
EQ uisaute Parameter values set in the Equalizing menu.
FILTER «ine Parameter values set in the Filter menu.
HUM CAN ................ Parameter values set in the Hum Filter menu.
DELAY/POL ............. Parameter values set in the Digital Delay/Polarity menu.
ATT ina Parameter values set in the Attenuator menu.
<DEQS control display example>
PARAMETER COPY
Ti FED-INI
2 EDIT AREA
S Ge