Yamaha DEQ5E Operation Manual page 11

POWER E
E)
© А
©
ol
=0N / DLOFF СЕЕ
G) Indicators
The followings indicators show the current system setup status of the unit.
€ INPUT (AES/EBU) ................... This lights when the audio signal is set to AES/EBU digital input side.
OFS ii ee RA An Oe Displays the current operation sampling frequency.
During AES/EBU input terminal digital input, or during operation of the
*WORD CLK" terminal clock signal, if the received signal is abnormal (input
level is too low or a circuit is broken) or not received properly, all Fs indi-
cators will turn off.
IN level meter
This displays, digitally, the input signal level after A/D conversion.
@ OUT level meter
This displays, digitally, output signal level before D/A conversion.
Analog VO adjustment control
Use the control IN to adjust the analog input level, and use the control OUT to adjust the analog output level.
Both controls have two cores, so that balance L can be adjusted by the inside core, and balance R can be adjusted
by the outside core.