Panasonic SC-AK95 Operating Instructions Manual page 18

8
Specified disc number __
i
@
Specified track number
Program order
_:_
• Everyone has their favorite tracks. You can program the changer
to play them in a specific order• With this changer, you can make
one program and fill it with up to 24 selections from any of the CDs
in the rack.
• You can also program a certain track during playback.
(See "Direct programming" below.)
[] Press CD.
Ensure CD is stopped.
[] Press PROGRAM.
[] Press DISC.
L_ While ,,_3 is flashing 10 seconds)
(approx.
Select the CD(s) you want with the numeric
button(s).
You can select slot No. O.
"SINGLE" appears on the display.
[] Press the numeric button(s) to select the de-
sired track.
[]
[]
Repeat steps 3 through 5 until you have pro-
grammed all the tracks you want.
Press I_/I I/^.
Play will start in the programmed sequence.
I Direct programming []
If, while listening to a certain track_ you decide that you want to pro-
gram that track to your program, you can with direct programming.
[While the track you want to program is playing]
Press PROGRAM.
The display will return to the original indication after about 3 .sec-
onds.
When you make a program as explained under "Program play"
above, and then perform this procedure without clearing the pro-
gram first, the selected track is added to the end of the program.
To listen to programmed tracks, press PROGRAM and check
"PRGM" appears on the display, then press I_.
During program play, the PROGRAM button does not operate.
(Continued on next page)