Panasonic SC-AK95 Operating Instructions Manual page 5

(R6/LR6 Insert the batteries inthe correct
AA size, UM-3) 0).
Selecting fineaudio e quipment such astheunit y ou've
just pur-
chased is only the start of your musical enjoyment. Now it's time to
consider how you can maximize the fun and excitement your equip-
ment offers. This manufacturer and the Electronic industries Associ-
ation's Consumer Electronics Group want you to get the most out of
your equipment by playing it at a safe level. One that lets the sound
come through loud and clear without annoying blaring or
distortion--and, most importantly, without affecting your sensitNe
hearing.
We recommend you to avoid prolonged exposure to excessive
noise.
Sound can be deceiving. Over time your hearing "comfort level"
adapts to higher volumes of sound. So what sounds "normal" can
actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe level
BEFORE your hearing adapts.
To establish a safe level:
oStart your volume control at a Iow setting.
eSlowly increase the sound until you can hear it comfortably and
clearly, and without distortion.
Once you have established a comfortable sound level:
eSet the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage
or loss in the future. After all, we want you listening for a lifetime.
l se of batteries 1
eDo not mix old and new batteries, or batteries of different types
(manganese and aika}ine, etc.).
eNever subject batteries to excessive heat or flame; do not attempt
to disassemble them; and be sure they are not short-circuited.
elf the _emote control is not to be used for a long period of time, re-
move the batteries and store them in a cool, dark pface.
eDo not attempt to recharge alkaline or manganese batteries.
eDo not use rechargeable type batteries.
Battery life
The battery life is about one year.
The bafteries shoulc_ be replaced if commands item the remote con-
trol transmitter do not operate the unit even when the transmitter is
held close to the front panel,
sensor
About 7 meters in front
of the signal sensor
Transmission
window
'l Operation notes t
eDo not place obstacles between the remote control signal sensor
and remote control unit.
oDo not expose the remote control signal sensor to direct sunlight
or to the bright light of ar_ invertor fluorescent light,
eTaKe care to keep the remote control signal sensor and end of the
remote control unit free from dust.
elf this system is installed in a rack with glass doors, the glass
doors' thickness or coJor might make it necessary to use the re-
mote control a shorter distance from the system,
To prevent damage t
• Never place heavy items on top of the unit,
• Do not disassemble or reconstruct the unit.
oDo not spill water or other liquids into the unit.