Reception - Kenwood TM-221A Instruction Manual

Hide thumbs Also See for TM-221A:
Table of Contents

Advertisement

TM-221A/321A/421A/521A U.S.A. version only
@ and @ UP/DWN (Up/Down) switches
These switches are used to step the VFO frequency
or Memory Channel up and down. The frequency will
change continuously if the switches are pressed and
held.
@) PTT (Push To Talk) switch
The
transceiver
will
be
placed
into
transmit
whenever this switch is pressed. Operations such as
scanning will be cleared when this switch is pressed.
@) 16-Tone DTMF Keypad (U.S.A. version only)
Used to activate the DTMF encoder. See Section 4-6
REPEATER for additional information on this item.
4-2.
RECEPTION
4-2-1.
Initial Control Settings
2.
Turn on the DC power supply and then press the
1.
Connect the power supply and antenna and then
POWER
switch on the radio; the display will in-
set the witches and controls as follows:
dicate a frequency.
3.
Adjust the VOL control clockwise until a signal
POWER switch
: OFF
or noise is heard.
POWER switch of the DC power supply
4.
Rotate the TUNING
control and select an open
(Fixed Station)
: OFF
channel.
Then
turn the SQL
control clockwise
VOL control
: Fully counterclockwise
until the noise just disappears.
SQL control
: Fully counterclockwise
5.
Select the desired frequency using the TUNING
control or UP/DWN
switches on the microphone.
(See
Section
4-2-2
Frequency
and
Memory
Channel Selection.)
lf a signal is received,
the BUSY
indicator will
turn on and the S-meter will deflect.
To
turn
off
the
transceiver,
turn
off
the
; WG o
rm
Z|
transceiver's POWER switch before you turn off
!
J
ILI
is
the power supply, or if in a vehicle,
before you
mms CC OHenooc
IO)
3
=a
:
stop the engine.
Fully counterclockwise
OFF
REV +
SCAN CTCSS
TONE
Fully counterclockwise
Note:
The TM-221A
front panel is used for illustration
purposes.
4
Note the initial factory delivered settings for Fre-
quency,
Tone Frequency,
Memory
Channel and
Frequency Step are shown in the accompanying
table.
TM-221A
TM-221ES
TM-321A
TM-421A
TM-421ES
TM-521A
TM-521E
440.000 MHz
VFO Frequency
144.000 MHz
220.000 MHz | (U.S.A.
version)|
430.000 MHz
1240.000 MHz
430.000 MHz
Frequency Step
5 kHz
12.5 kHz
20 kHz
25 kHz
Memory Channel
Memory Channel 0
440.000 MHz
Memory Channel
144.000 MHz
220.000 MHz | (U.S.A. version)|
430.000 MHz
1240.000 MHz
430.000 MHz
Tone Frequency
88.5 Hz
——
88.5 Hz
oe
88.5 Hz
———
Bea

Advertisement

Table of Contents
loading

Table of Contents