Panasonic PRO-HT Tank Series Technical Manual page 114

Appendix
A
112
APPLIANCE & TIME CONTROL DETAILS
Manufacturer
Capacity
Type
Time control
COMMISSIONING PROCEDURE INFORMATION
Primary settings (indirect heating only)
IS THE PRIMARY A SEALED OR OPEN VENTED SYSTEM?
WHAT IS THE MAXIMUM INDIRECT HEAT SOURCE FLOW TEMPERATURE?
ALL MAINS PRESSURISED SYSTEMS
WHAT IS INCOMING STATIC COLD WATER PRESSURE AT THE INLET TO THE
PRESSURE REDUCING VALVE?
HAS STRAINER (IF FITTED) BEEN CLEANED OF INSTALLATION DEBRIS?
HAS A WATER SCALE REDUCER BEEN FITTED?
WHAT TYPE OF SCALE REDUCER HAS BEEN FITTED?
UNVENTED SYSTEMS
ARE COMBINED TEMPERATURE AND PRESSURE RELIEF VALVE AND
EXPANSION VALVE FITTED AND DISCHARGE TESTED?
IS PRIMARY ENERGY SOURCE CUT OUT FITTED?
WHAT IS THE PRESSURE REDUCING VALVE SETTING (IF FITTED)?
WHERE IS OPERATING PRESSURE REDUCING VALVE SITUATED?
HAS THE EXPANSION VESSEL BEEN CHECKED?
WHAT IS THE HOT WATER TEMPERATURE AT THE NEAREST OUTLET?
ALL PRODUCTS
DOES THE HOT WATER SYSTEM COMPLY WITH
THE APPROPRIATE BUILDING REGULATIONS?
HAS THE SYSTEM BEEN INSTALLED AND COMMISSIONED
IN ACCORDANCE WITH THE MANUFACTURER'S INSTRUCTIONS?
HAVE YOU DEMONSTRATED THE OPERATION OF THE
SYSTEM CONTROLS TO THE CUSTOMER?
HAVE YOU LEFT ALL THE MANUFACTURER'S
LITERATURE WITH THE CUSTOMER?
COMPETENT PERSON'S
SIGNATURE
PLEASE FOLLOW THE INSTALLATION AND COMMISSIONING INSTRUCTIONS IN THE
INSTALLATION MANUAL SUPPLIED WITH THE EQUIPMENT
litres
Unvented
Programmer or
CUSTOMER'S
SIGNATURE
(To confirm demonstrations of equipment and
receipt of appliance instructions)
PAW-VP•LDHW - Technical Manual – 2020-07
Model
Serial no.
Time switch
SEALED OPEN
YES NO
YES NO
YES NO
YES NO
YES NO
YES
YES
YES
YES
°C
bar
bar
°C