Engine Start/Stop Button - Honda Civic 2019 Manual

Models with smart entry system

ENGINE START/STOP Button

■
Changing the Power Mode
Continuously Variable Transmission
VEHICLE OFF (LOCK)
The button is off.
The steering wheel is locked
The power to all electrical
components is turned off.
*2
ACCESSORY
The button blinks (in red).
Operate the audio system and
other accessories in this position.
ON
The button blinks (in red).
All electrical components can be
used.
Without pressing
the brake pedal
Press the button without the
transmission in P ( .
Press the button with the
transmission in .
P (
*1: Except U.S. models with continuously variable transmission
*2: U.S. models
uuOperating the Switches Around the Steering WheeluENGINE START/STOP Button
Manual Transmission
*1 .
Without pressing
the clutch pedal
Press the button.
Put the transmission into *2 .
P (
1ENGINE START/STOP Button
ENGINE START/STOP Button Operating Range
You can start the engine when the smart entry
remote is inside the vehicle.
Operating Range
The engine may also run if the smart entry remote is
close to the door or window, even if it is outside the
vehicle.
ON mode:
The ENGINE START/STOP button is on (in red), if the
engine is running.
If the battery of the smart entry remote is getting
low, the engine may not start when you push the
ENGINE START/STOP button. If the engine does not
start, refer to the following link.
2 If the Smart Entry Remote Battery is Weak
P. 629
Do not leave the power mode in ACCESSORY or ON
when you get out.
Continued 161