Draytek Vigor 2927 Series Quick Start Manual page 6

No. Interface
wireless LAN
ON / OFF / WPS
(3)
Factory reset
USB1 ~ 2 / USB
(4)
WAN1
(5)
Description
The wireless band will be switched/changed according to the
button pressed and released. For example,
- 2.4G (On) and 5G (On): By default.
- 2.4G (off) and 5G (on): Press and release the
button once.
- 2.4G (On) and 5G (Off): Pressed and released the button
twice.
- 2.4G (Off) and 5G (Off) - pressed and released the
button three times.
When the WPS function is enabled by the web UI, please press this button for more
than 2 seconds to wait for the client device to connect to the network via WPS.
Restore default settings. Usage: Power on the router (ACT LED blinks). Press
the hole and hold for more than 5 seconds. When you see the ACT LED start
blinking faster than usual, release the button. Then the router will reboot to the
factory default settings.
Conector para dispositivo USB (for modem USB 3G / 4G or printer
or thermometer).
Connector for local network devices or modem to access the
Internet.