Torque Specifications; Operating Conditions; Noise Level; Tilt Sensor Specifications - ABB InCharge Terra 184 Manual

Technical data
10.7

Torque specifications

Parameter
Fasteners for the PE wire
Fasteners for the L1, L2, L3 wires
Fasteners for an alternative base
Fasteners for the tilt sensors
Fasteners for the cable management
system
10.8

Operating conditions

Parameter
Environment, general
Storage temperature
Operation temperature range
Maximum altitude above sea level
10.9

Noise level

Noise level
Maximum noise level at a distance of 1 m
(3.2 ft)
10.10

Tilt sensor specifications

10.10.1

General specifications

Parameter
Voltage input
Power consumption
Reverse polarity protection
Isolation Rating
76
Note: Operation of the EVSE outside the operating temperature ranges
and above the maximum altitude is not allowed and voids the product
warranty. The owner of the EVSE is responsible to ensure that the unit is
used within its operation range
Specification
[Nm] [lb-in]
Between 33 and 44 Between 292 and
389
Between 33 and 44 Between 292 and
389
Between 33 and 44 Between 292 and
389
1.3 11.5
Between 33 and 44 Between 292 and
389
Specification
SI units Imperial units
Indoor and outdoor
-40°C to +70°C -40°F to +158°F
-35°C to +50°C -31°F to +122°F
2000 m 6500 ft
Specification
< 62 dB(A)
Specification
20..24 V DC
Maximum 30 mA
Yes
300 V
9AKK108466A3703-EN | 001