Maintenance And Cleaning; Maintenance Schedule; Clean The Cabinet - ABB InCharge Terra 184 Manual

7

Maintenance and cleaning

7.1

Maintenance schedule

Task

Clean the cabinet.

Do a check for damage on
the EV charge cables and
the connectors.
Do a check for damage on
the cabinet.
Replace the filters for the
air inlets.
Make sure that the manu-
facturer does maintenance
on the EVSE.
Replace the filters for the
air outlets.
7.2 Clean the cabinet
Preliminary requirements
Procedure
1. Rinse with low-pressure tap water to remove rough dirt.
2. Apply a solution of cleaning agent to the cabinet and let it soak.
9AKK108466A3703-EN | 001
Frequency
4 months
3 months
6 months
1 year
1 year
After the first year, then 2
years
• Owner
Danger:
Hazardous voltage
• Do not apply high-pressure water jets. Water can leak into the
cabinet.
Note: When the EVSE is put in a corrosion sensitive environment,
superficial rust is possible on welding points. This rust is only visual.
There is no risk for the integrity of the cabinet. The procedure below
removes the rust.
Maintenance and cleaning
Procedure
Refer to section 7.2.
Refer to section 7.3.
Refer to section 7.3.
Refer to section 7.4.
Ask the manufacturer to
do the task. Refer to sec-
tion 1.12.
For the complete mainte-
nance schedule refer to
section 7.1.
For the required spare
parts refer to section
10.22.
Refer to section 7.5.
• Cleaning agent and a non-
abrasive tool. Refer to
section 10.21.
65