NETGEAR Orbi Pro SRK60 User Manual page 119

Table 5. Factory default settings for the satellite (Continued)
Feature
Local LAN IP
network
Subnet mask
(LAN)
DHCP server
DHCP range
DHCP starting IP address
DHCP ending IP address
DMZ
Time zone
Time zone adjusted for daylight
saving time
SNMP
Firewall Inbound (communications
coming in from the Internet)
Outbound (communications
going out to the Internet)
Source MAC filtering
WiFi WiFi communication
SSID name
Security
Broadcast SSID
Transmission speed
Country/region
RF channel
2
Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and network
overhead, lower actual data throughput rate.
Orbi Pro
Default Setting
192.168.1.250
255.255.255.0
Enabled
192.168.1.2 to 192.168.1.254
192.168.1.2
192.168.1.254
Disabled
GMT for WW except NA and GR,
GMT+1 for GR, GMT-8 for NA
Disabled
Disabled
Disabled (except traffic on port 80,
the HTTP port)
Enabled (all)
Disabled
Enabled
See satellite label
WPA2-PSK (AES)
Enabled
2
Auto
United States in the US; otherwise,
varies by region
2.4 GHz front and back haul: Auto
5 GHz front haul:
• Channel 48 for NA, AU, and
CA
• Channel 36 for EU
5 GHz back haul:
• Channel 48 for NA, AU, and
CA
• Channel 36 for EU
Supplemental Information
119