Table of Contents
Advertisement
AUDIO DUBBING
To "AUDIO IN"
"VIDEO
IN"
(White)
(Yellow)
To "AV IN" {
foe
Video/Audio Output Cord
Video/Audio Input Cord
To "AUDIO
OUT"
(Optional Accessory)
(White)
1. Insert a recorded tape.
Be sure that the record safety tab is not missing.
"VCR/CAM" Select Switch
2. Slide ""VCR/CAM" select switch to ""VCR".
"PLAY" Button
3. Play the tape and press 'STILL
(REC/PAUSE)"
button where you want to dub audio.
"STOP" Button
© The camera/recorder enters the still play mode.
"STILL (REC/PAUSE)"
4. Press "AUDIO
DUB" and "PLAY" buttons at the
Button
same time.
© "A.DUB" appears in the viewfinder.
5. Press "STILL (REC/PAUSE)" button to start audio
dubbing.
6. Press "STOP" button to stop audio dubbing.
NOTE: If counter memory "M" appears in the view-
finder, the tape stops automatically at the reading of
"0:00:00" and audio dubbing stops.
NOTE: You can also dub both the video and audio
simultaneously if desired.
To do so, press "AUDIO
DUB"
and
"PLAY"
buttons
first,
then
press
"VIDEO
DUB"
and
"PLAY"
buttons
in step 4
above.
E34
Advertisement
Table of Contents
