Identification And Operation Of Controls - Hitachi VM-2300A Instruction Manual

IDENTIFICATION AND OPERATION OF CONTROLS
"SHUTTER" Speed Control Switch Record Indicator
Used to control the shutter speed during Flashes for about 10 seconds when the "SELF
recording and/or record/pause (stand-by) TIMER" switch is pressed during record/
pause (stand-by) mode and stays on to indicate
recording starts.
mode. (See "VARIABLE SHUTTER
SPEED" on page 26.)
Power Zoom Switch
This switch performs zooming electrically.
"WW; Picture becomes wider gradually.
"T". Picture becomes telescopic gradually.
Zoom Ring (Manual Zooming)
The picture size can be magnified 8 times for
VM-3300A (6 times for VM-2300A) with the use ,
of the zoom feature. Just rotate the zoom ring
for a close up (T) or wide angle (W) picture.
Macro close-up, as close as 1 cm from object,
is feasible.
Focus Ring
Do not attempt to manually turn the focus ring,
when the camera/recorder is in the auto focus %,
Auto Focus Window
To automatically focus the camera lens, this
window transmits and receives infrared light ama
which is reflected off the object. Make sure
you don't obstruct this window when
recording.
Lens
F1.4 (8.7 ~ 70 mm) 8:1 power zoom lens for =
VM-3300A [F1.4 (9 ~ 54 mm) 6:1 power zoom
lens for VM-2300A1 features auto focus and
auto iris functions.
"DISPLAY" Button
Pressing this button once causes a 5 digit linear &
time counter and battery indicator to appear in
the camera/recorders viewfinder. Pressing the
"PUSH AUTO" Focus
Button
paronadatt wil a
paren. indlestor sale
Auto focusing can be also performed during
the amount of time remaining on the cassette
manual focus mode by pushing this button.
in the camera/recorder.
Press a 3rd time to delete all displays.
E14