Toro 39521 Operator's Manual page 8

1. Tipping hazard—do not turn sharply while travelling fast; slow
down and turn gradually.
2. Tipping hazard—do not operate the machine near drop-offs.
1. Read and understand the Operator's Manual before servicing
this machine.
2. Grease the front caster pivots (2x) every 100 hours.
3. Refer to the engine owner's manual for service.
4. Check the auxiliary pump-drive belt tension every 50 hours.
5. Grease the front caster wheel bearings (2x) every 100 hours. 13. Check the tire pressure, 13 psi, (2x) every 50 hours.
6. Grease the control pivots (4x) every 50 hours.
7. Grease the jackshaft bearings (8x) every 25 hours.
8. Check the hydraulic-fluid level (2x) every 50 hours.
135-2841
3. Warning; tipping hazard—do not use split ramps; use
full-width ramps to load a machine for transport.
116-9392
9. Check the auxiliary hydraulic tank every 50 hours.
10. Grease the wheel bearings (2x) every 25 hours.
11. Grease the tine assembly idlers (2x) every 25 hours.
12. Grease the tine shaft bearings (4x) every 25 hours.
14. Clean and oil the chains and check the chain tension (2x)
every 8 hours.
15. Grease the belt idler pivot every 100 hours.
8
decal135-2841
decal116-9392